 |
A closer look of the transaxle ("front" or "right hand") case. You can see the speedo drive. The differential bearing race and output shaft bearings are brand new in this pic. |
| The transmission ("rear" or "left hand") case. You'll notice that the diff bearing race and shim are missing. I needed to get the next thicker shim to get the diff bearing preload back into spec. |  |
 |
The reassembly process begins. The 2nd gear needler roller bearing, # 1 shift hub, and 1st gear are on the output shaft in this pic. |
| Here, 2nd gear and 3rd driven gear are being pressed onto the output shaft. |  |
 |
A completely assembled output shaft assy with new synchros and bearings. |
| A completely assembled input shaft assy with new synchros and bearings. Those are 2 of the Oak 4"x4"x12" blocks. |  |
[ Page 1 | Page 2 | Page 3 | Page 4 | Page 5 | Page 6 ]